401 KAR 34:280. Air emission standards for equipment leaks.

 

      RELATES TO: KRS Subchapters 224.01, 224.10, 224.40, 224.43, 224.46, 224.50, 224.70, 224.99, 40 C.F.R. 264 Subpart BB

      STATUTORY AUTHORITY: KRS 224.40-100, 224.46-520

      NECESSITY, FUNCTION, AND CONFORMITY: KRS 224.46-520 requires that persons engaging in the storage, treatment, and disposal of hazardous waste obtain a permit. KRS 224.46-520 requires the Environmental and Public Protection Cabinet to establish standards for these permits, to require adequate financial responsibility, to establish minimum standards for closure for all facilities, and the postclosure monitoring and maintenance of hazardous waste disposal facilities. This administrative regulation establishes air emission standards for equipment leaks.

 

      Section 1. Definitions. The subject matter shall be governed by 40 C.F.R. 264.1051, effective July 1, 2005.

 

      Section 2. Applicability. (1) The subject matter shall be governed by 40 C.F.R 264.1050(a) through (f) and (h), effective July 1, 2005.

      (2) The citation to section 3005 of RCRA in the federal regulation referenced in subsection (1) of this section shall be replaced with KRS 224.46-520 or 224.46-530.

 

      Section 3. Standards for Pumps in Light Liquid Service. The subject matter shall be governed by 40 C.F.R 264.1052, effective July 1, 2005.

 

      Section 4. Standards for Compressors. The subject matter shall be governed by 40 C.F.R 264.1053, effective July 1, 2005.

 

      Section 5. Standards for Pressure Relief Devices in Gas or Vapor Service. The subject matter shall be governed by 40 C.F.R 264.1054, effective July 1, 2005.

 

      Section 6. Standards for Sampling Connection Systems. The subject matter shall be governed by 40 C.F.R 264.1055, effective July 1, 2005.

 

      Section 7. Standards for Open-ended Valves or Lines. The subject matter shall be governed by 40 C.F.R 264.1056, effective July 1, 2005.

 

      Section 8. Standards for Valves in Gas or Vapor Service or in Light Liquid Service. The subject matter shall be governed by 40 C.F.R 264.1057, effective July 1, 2005.

 

      Section 9. Standards for Pumps and Valves in Heavy Liquid Service, Pressure Relief Devices in Light or Heavy Liquid Service, and Flanges and Other Connectors. The subject matter shall be governed by 40 C.F.R 264.1058, effective July 1, 2005.

 

      Section 10. Standards for Delay of Repair. The subject matter shall be governed by 40 C.F.R 264.1059, effective July 1, 2005.

 

      Section 11. Standards for Closed-vent Systems and Control Devices. The subject matter shall be governed by 40 C.F.R 264.1060, effective July 1, 2005.

 

      Section 12. Alternative Standards for Valves in Gas or Vapor Service or in Light Liquid Service and the Percentage of Valves Allowed to Leak. The subject matter shall be governed by 40 C.F.R 264.1061, effective July 1, 2005.

 

      Section 13. Alternative Standards for Valves in Gas or Vapor Service or in Light Liquid Service: Skip Period Leak Detection and Repair. The subject matter shall be governed by 40 C.F.R 264.1062, effective July 1, 2005.

 

      Section 14. Test Methods and Procedures. The subject matter shall be governed by 40 C.F.R 264.1063, effective July 1, 2005.

 

      Section 15. Recordkeeping Requirements. The subject matter shall be governed by 40 C.F.R 264.1064, effective July 1, 2005.

 

      Section 16. Reporting Requirements. The subject matter shall be governed by 40 C.F.R 264.1065, effective July 1, 2005. (20 Ky.R. 1441; Am. 1947; eff. 2-10-94; 23 Ky.R. 663; eff. 3-12-97; 33 Ky.R. 2099; 3821; eff. 6-13-2007.)